Award H103 Інструкція із застосування - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція із застосування для Варильна поверхня Award H103. Award H103 20 сторінок.
Друкувати сторінкуStarting-up
You must first switching on the hob, then the heating zone:
•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 second, the electronics returns in waiting position.
Pan detection
The pan detection ensures safe operation of the appliance. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level previously set.
After use, switch the heat zone off: don't let the pan detection [ U ] active.
Residual heat indication
After switching off the heat zone or stopping the hob, the heating zones are still hot and indicates
[ H ] on the display.
The symbol [ H ] disappears when the heating zones can be touched without danger.
When the residual heat indicators are light, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.
Control panel
Press key [
]
Press key [
]
Control panel
Press display [ 0 ] for zone
Slide the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
9
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ] and control light on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]