Award Session AP10 Посібник з експлуатації - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Підсилювач Award Session AP10. Award Session AP10 3 сторінки. Acoustic instrument preamp

Друкувати сторінку

Rear Panel Facilities

1. OUTPUT- Lo-Z to drive long cables without tone/volume loss.

2. POWER CONNECTOR - To connect an AC Adaptor.

3. XLR OUTPUT - to connect to desk/board via a mic cable.

4. TUNER OUTPUT - Full time, buffered signal to drive a tuner

5. INPUT - Mega-Z circuitry to eliminate pickup loading.

AC Adaptor Operation - AP10 runs on ANY adaptor giving a POSITIVE or

NEGATIVE output between 9 and 16 volts DC. AP10 is equipped with circuitry

that senses the incoming voltages and AUTOMATICALLY adjusts itself internally.

NO HARM CAN BE DONE BY USE OF INCORRECT AC ADAPTORS,

providing the above guidelines are adhered to.

AP10 will run on a 9 volt Alkaline battery when an AC adaptor is not convenient.

Remove the four outside screws holding the base to the top. The battery will be

found inside.

Thanks for buying our product, we appreciate it!