Christie 38-817001-01 Series Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з монтажу для Стелажі та підставки Christie 38-817001-01 Series. Christie 38-817001-01 Series 13 сторінок. Projector mount
Також для Christie 38-817001-01 Series: Інструкція з монтажу (2 сторінок)
Друкувати сторінку
Base Box Assembly
Ceiling Installation – 20RL
1.
Separate the upper bridge from the base box by removing the six (6) M5 x 12 mm screws that are
located on the base box, three on each side (A).
2.
Secure the top bridge to the ceiling structure at this time (see warning label) using commercially
available hardware (B).
3.
Use the two (2) middle slot openings for single wood stud mounting. All other mounting points on
the top bridge may be used depending on your installation environment application (B).
4.
Replace the bottom base box to the secured top bridge and secure with the six M5 x 12 mm screws
(D).
A
B
C
D
Installation Manual
REMOVE SCREWS
REMOVE SCREWS
WOOD STUD
TOP BRIDGE
BASE BOX
(2) CONICAL SPACERS
(2) FLAT WASHERS
M6 X 12 mm
(2) HINGE PIN SCREWS
Figure 1. Ceiling Installation – 20RL
CEILING STRUCTURE
(COMMERCIALLY AVAILABLE)
SUITABLE HARDWARE
(6) M5 x 12 SCREWS
Page 7