Christie Terra TXO 102 SO Посібник з налаштування та встановлення - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з налаштування та встановлення для Контролер Christie Terra TXO 102 SO. Christie Terra TXO 102 SO 17 сторінок. Controlled systems

Друкувати сторінку

Install and Setup

Use the following information to install Terra TXs and RXs for Extender applications.

Extender Applications

Christie Terra TXs and RXs extend and process audiovisual content, including 4K@60Hz video formats,

over fiber connections.

Accessories

Required

OM3 multimode 850nm fiber cable with duplex LC-LC connectors (300m

maximum distance)

Single mode fiber or Category cable such as CAT-6a can be used with

Terra TXs and RXs by substituting compatible 10G SFP+ transceivers

and compatible cables.

10G SFP+ Direct Attach Cables or Twinax copper cables with hard

wired SFP+ transceivers can also be used.

HDMI IN cable or DisplayPort cable

HDMI out cable

AV source device

AV display device (embedded audio ready for HDMI audio)

TX and RX Ports and Status Indicators

Power indicator

B-F

Signal and system indicators

Button (currently unused but can be set

using Terra Manager)

Switch button to switch between inputs;

or to reset to factory defaults.

DisplayPort 1.2 input port

HDMI 2.0 input port

10G SFP+ Transceiver with LC-LC port

1G Ethernet (RJ-45) port

USB 2.0 Type-B port

Terra Controller Installation and Setup Manual

020-102804-02 Rev. 1 (09-2018)

Optional

Audio cable: 3.5 mm stereo mini-jack

Remote control cables: IR transmitter 3.5

mm DC mini-jack cable; IR receiver 3.5

mm stereo mini-jack cable

USB 2.0 type-A cable, keyboard, mouse

Speaker for analog audio

Power indicator

2-6

Signal and system indicators

Button (currently unused but can be set

using Terra Manager)

Button used to copy EDID to Transmitter; or

to reset to factory defaults.

HDMI 2.0 output port

10G SFP+ Transceiver for with LC-LC port

1G Ethernet (RJ-45) port

USB 2.0 type-A port

External power port