Miele NOVOTRONIC W 1926 Інструкція з експлуатації Посібник з експлуатації - Сторінка 31
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Пральна машина Miele NOVOTRONIC W 1926. Miele NOVOTRONIC W 1926 48 сторінок. Miele washer user manual
Також для Miele NOVOTRONIC W 1926: Інструкція з експлуатації Посібник з експлуатації (48 сторінок)
Друкувати сторінку
INSTALLATION INSTRUCTIONS
Installation surface
Experience has shown that a concrete
floor is the most suitable surface for a
washing machine. Concrete floors are
less prone to vibration during the spin
cycle than wooden floors.
Please note the following points:
^ The machine must be level and se-
curely positioned.
^ To avoid vibration during spinning,
the machine should not be installed
on soft floor coverings.
^ If installation must be on a wooden
joist floor, we recommend the use of
a plywood base at least 1
5
5
23
/
" X 23
/
8
8
600mm X 600mm). Ideally the base
should be large enough to span sev-
eral joists and should be anchored to
the joists and not just the floorboards.
^ As a general rule, we recommend the
installation of the machine (or
washer/dryer stack) in the corner of a
room where the stability of the floor is
greatest.
^ If the machine is installed on a raised
platform, it should be secured using
retaining clips (available from the
Miele Technical Service Dept.). If in-
stalled on a masonary or concrete
base, the base should be provided
1
with a rim
/
" to
2
1
/
" thick by
4
" wide (30mm X
3
/
" (12-20 mm) high.
4
INSTALLATION INSTRUCTIONS
Installation
Lift the machine from its shipping pallet
and move it to the installation site.
Please note:
^ Do not lift the machine by the drum
door.
^ Ensure that the machine feet and the
floor are dry to prevent slippage dur-
ing the spin cycle.
Removing the shipping struts
^ Turn the left shipping strut 90° coun-
terclockwise.
31