Miele PFD 104 SCVi План інсталяції - Сторінка 4

Переглянути онлайн або завантажити pdf План інсталяції для Пральна машина Miele PFD 104 SCVi. Miele PFD 104 SCVi 24 сторінки.
Також для Miele PFD 104 SCVi: Монтажні креслення (2 сторінок), Посібник із швидкого старту (2 сторінок), Посібник (2 сторінок)

en - Installation notes

Installation re-

quirements

Vapor-barrier film

for built-in appli-

ances

Electrical connec-

tion

Plug connection

Hard-wired

Equipotential

bonding and

grounding

Installation notes

For safe installation and commissioning of the dishwasher please

read the installation plan, the service documentation, the installa-

tion diagram, and the operating instructions.

This installation plan includes the dimensions of the appliance, the

technical data, and the requirements to be met on site for the installa-

tion of the dishwasher.

Installation and commissioning work should be performed by a quali-

fied and trained service technician in accordance with local and na-

tional safety regulations.

Installation must comply with all local codes and regulations.

Condensate can build up in the area surrounding the dishwasher. Any

cabinetry and fittings in the room must, therefore, be suitable for this

purpose.

The vapor-barrier film supplied with the dishwasher protects the

countertop from damage caused by steam when the door is opened.

Attach the vapor-barrier film above the door, underneath the counter-

top.

All work on the electrical connection should be carried out by Miele

Service, an authorized Miele dealer or a qualified service technician.

The dishwasher should be connected to the electricity supply via an

electrical socket outlet.

If the dishwasher is hard-wired to the power supply, an appropriate

circuit breaker for the circuit in compliance with local code must be

used.

The electrical socket outlet and the power switch must be accessi-

ble after the appliance has been installed. This is to enable any ser-

vicing work.

The power cord must be protected from the risk of thermal damage.

This machine must be grounded in accordance with local code.