Miele PW 5062 Інструкція з експлуатації та монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Пральна машина Miele PW 5062. Miele PW 5062 26 сторінок.
Друкувати сторінку
Technical safety
~
Before setting up the machine,
check it for any externally visible
damage.
Do not install or use a damaged
machine.
~
The electrical safety of this machine
can only be guaranteed when correctly
earthed. It is most important that this
basic safety requirement is observed
and regularly tested, and where there is
any doubt the on-site wiring system
should be inspected by a qualified
electrician. The manufacturer cannot be
held liable for the consequences of an
inadequate earthing system (e.g.
electric shock).
~
Unauthorised repairs could result in
unforeseen dangers for the user, for
which Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician. If
this is not done, any resultant damage
will not be covered by the guarantee.
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
~
Do not make any alterations to the
machine, unless authorised to do so by
Miele.
Warning and Safety instructions
~
The machine must be isolated from
the electricity supply in the event of a
fault and during installation,
maintenance and repair work.
~
This machine must only be
connected to the on-site water supply
using a new hose kit. Old hoses must
not be re-used. Check the hose
regularly for signs of wear. Change in
good time to avoid the risk of leaks and
subsequent damage.
~
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
~
Do not connect the machine to the
mains electricity supply by an extension
lead or a multi-socket adapter. These
do not guarantee the required safety of
the machine (e.g. danger or
overheating).
7