Miele PWM 920 DD План інсталяції - Сторінка 9

Переглянути онлайн або завантажити pdf План інсталяції для Пральна машина Miele PWM 920 DD. Miele PWM 920 DD 34 сторінки. Commercial washing machine

Dispenser pump connections on the back of the machine

Connections 1 and 2 are provided for viscous agents and can also be

used for high-pressure dispensing systems with water injection. The

dispensing systems must be fitted with a separate drinking water

safety feature in accordance with EN 61770 and EN 1717. The maxi-

mum flow rate is 1500 ml/min with a maximum flow pressure 43 psi

(300 kPa).

These connectors are sealed and need to be drilled open using an

8 mm drill bit before connecting.

Care must be taken to drill through the first wall only (I) as there is a

deflecting panel (II) 3/8" (10 mm) behind it.

Connections 3 to 12 are provided for liquid detergent. High-pressure

dispensing systems with water injection must not be connected to

these connections. These connectors are sealed and must be cut to

the diameter of the hose with a small saw prior to being made.

If opened connectors are no longer required, they must be resealed

using a suitable sealant (e.g., silicone).

Connection terminals for five time-controlled dispenser pumps, which

can be operated without a multifunction module, are located behind

the cover adjacent to the electrical connection.

Calibration of the dispenser pumps and regulation of dispensing

quantities is carried out semi-automatically for washing machines

fitted with an optional multifunction module. Information regarding

settings is given in the operating instructions.

en - Installation and planning notes