Miele NOVOTRONIC G 842 SC PLUS Інструкція з експлуатації Посібник з експлуатації - Сторінка 37
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Посудомийна машина Miele NOVOTRONIC G 842 SC PLUS. Miele NOVOTRONIC G 842 SC PLUS 48 сторінок. Miele dishwasher user manual
Також для Miele NOVOTRONIC G 842 SC PLUS: Інструкція з експлуатації Посібник з експлуатації (49 сторінок)
Друкувати сторінку
- 1. Table of Contents
- 2. Changing a Program
- 3. Program Guide
- 4. Frequentjy Asked Questions
- 5. After Sales Service
- 6. Transport
- 7. User Maintenance Instructions
- 8. Cleaning the Filter in the Wash Cabinet
- 9. Cleaning the Spray Arms
- 10. Cleaning the Wash Cabinet
- 11. Cleaning the Door and Door Seal
- 12. Cleaning the Exterior
- 13. Cleaning the Water Inlet Filter
- 14. Cleaning the Drain Pump and Non-Return Valve
Frequentny
asked questions
What if ...
dishes are not ctean?
Possible
fau_t
The dishes were not
loaded correctly.
The program was not
)owerful enough.
tea or Hpstick stains
have not been com-
pletely removed?
white residue is visibJe
on cutlery and dishes,
clouding
occurs on
glassware
and film can
be wiped off?
there is a bJuish sheen
on the surface of
glasses and film can be
wiped off?
Not enough detergent
was dispensed.
The spray arm jets are
clogged.
The triple filter is clogged
or not correctly seated.
The drain pump or the
non-return valve are
blocked.
The wash temperature of
the selected program was
too low.
Not enough detergent
was used.
Not enough rinse aid was
used.
The salt reservoir is
empty.
The salt reservoir cap was
not correctly screwed on.
The programmed setting
of the water softener is too
low.
The rinse aid dosage is
set too high.
Fix
See, "Loading the dish-
washer".
Select a more intensive
program see, "Program
guide".
Use more detergent, see,
"Adding detergent".
Clean the spray arm jets,
see, maintenance
instruc-
tions.
Clean and/or reseat the fil-
ter, see, maintenance in-
structions.
Clean the drain pump and
the non-return valve, see
maintenance
instructions.
Select a program with a
higher temperature.
Use more detergenL
Increase the dosage,
see "Before using for the
first time".
Add reactivation salt,
see "Before using for the
first time".
Reseat it making sure it
screws back on correctly.
Adjust the setting of the
water softener, see "Be-
fore using for the first
time".
Reduce the dosage, see
"Before using for the first
time".
37