360 Yield 360 Y-DROP HAGIE DTS 2016 + Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сільськогосподарське обладнання 360 Yield 360 Y-DROP HAGIE DTS 2016 +. 360 Yield 360 Y-DROP HAGIE DTS 2016 + 10 сторінок.

Друкувати сторінку

INSTALL BREAKAWAY ASSEMBLY -

ONE PIECE

Figure 16

Step 1

Install breakaway assembly - one piece (1)

using the square U-bolts (2) and the extra

thick washer and Nylock nut. Repeat for

the remaining breakaway assemblies -

one piece.

Hardware Kit C

Figure 17

Figure 17 may show more or fewer mounts than

your installation. The alignment and quantity of the

mounts will depend on your row spacing.

Figure 18

Step 2

Install riser tube assembly (1) into the

breakaway assembly - one piece (2).

Step 3

Install pin (3).

Repeat Steps 2 and 3 for the remaining riser tube

assemblies.

NOTE: Included in most sprayer mount packages

are standard riser mounts to be used when primary

booms are folded and in transport mode. These

standard riser mounts should be mounted in

locations that allow you to relocate the drops away

from potential tire interference. See "Install Riser

Mounts Without Breakaway Assemblies" section on

next page for more instructions.

INSTRUCTIONS 360 Y-DROP

Figure 16

Figure 17

Figure 18

HAGIE DTS 2016 +

360YIELDCENTER.COM