Miele AWG 102 Інструкція з монтажу Посібник з монтажу - Сторінка 19

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Вентиляційна витяжка Miele AWG 102. Miele AWG 102 28 сторінок. External motor roof installation
Також для Miele AWG 102: Посібник з експлуатації та встановлення (24 сторінок), Інструкція з експлуатації та монтажу (28 сторінок), Інструкція з монтажу Посібник з монтажу (28 сторінок)

DDF 125/150

* Flashing

The DDF 125/150 roof vent is designed

for installing ducting through pitched

tiles, pantiled, slate or shingle roofs.

The slope of the roof must be at least

22° to prevent the ingress of the

elements, such as rain or snow.

Consult a roofing expert for advice

regarding other types of roofing.

This motor unit is not suitable for

installation on a flat roof.

Installation must only be carried out

by a qualified and competent person.

 Remove the roofing around the

installation area.

 Bend the flashing * upwards.

 Position the roof vent on the roof with

the air outlet directed down the roof.

 Secure the roof vent to the roof

substructure with the fixing plate.

 Replace the roofing. Press down on

the flashing to ensure that it creates a

proper seal.

The flashing should be fitted under

the roofing at the top of the roof vent

and above the roofing at the sides

and bottom of the roof vent.

The ducting collar on the roof vent has

a diameter of 150 mm as standard.

If a diameter of 125 mm is required the

reducing collar supplied must be used.

 Push the flexible ducting onto the

connection on the roof vent and

secure it with a hose clip.

It has an integrated non-return flap.

When feeding the exhaust ducting

through the substructure of the roof,

be careful to ensure that any gaps

are sealed up properly afterwards.

Installation