Miele DA 219-2 EXT Інструкція з експлуатації та монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Вентиляційна витяжка Miele DA 219-2 EXT. Miele DA 219-2 EXT 40 сторінок. Miele operating and installation instructions cooker hoods da 216-2, da 216-2 ext, da 217-2, da 219-2, da 219-2 ext

Друкувати сторінку

Cleaning and care

Before any cleaning or maintenance

work the cooker hood must be dis-

connected from the mains supply.

Ensure that:

– it is switched off at the wall socket

and the plug has been withdrawn

(do not pull on the cable, only on

the plug), or

– the fuse has been withdrawn from

the fused spur connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed (in

countries where this is applicable).

Warning: The surfaces and controls

are susceptible to scratches and ab-

rasion. Please observe the following

cleaning instructions:

All external surfaces and controls

can be cleaned using warm water

with a little washing up liquid applied

with a soft sponge.

Wipe dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Avoid:

– cleaning agents containing soda,

acids or chlorides,

– abrasive cleaning agents, e.g. pow-

der cleaners or cream cleaners,

– abrasive sponges, e.g. pot scourers

or sponges which have been pre-

viously used with abrasive cleaning

agents.

These will damage the surface material.

Stainless steel surfaces can be

cleaned using a proprietary non-ab-

rasive cleaning agent designed specifi-

cally for use on stainless steel.

To help prevent re-soiling, proprietary

conditioning agents for stainless steel

can also be used.

Apply sparingly with an even pressure.

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part Number 98013530, which is suit-

able for cleaning surfaces such as

stainless steel, glass, plastic and

chrome.

These controls may suffer discolour-

ation or damage if soiling is left on

them for too long.

Remove any soiling straight away.

Do not use stainless steel cleaning

agents on these types of controls.