Miele DA 326 i Посібник з експлуатації та встановлення - Сторінка 30

Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Вентиляційна витяжка Miele DA 326 i. Miele DA 326 i 40 сторінок.

(Standard wall unit 60 cm wide)

The side spacers cover the gaps be-

tween the sides of the appliance and

the wall unit.

Before fitting the side spacers, use a

knife to make a cut-out in the side

spacer for the appropriate side of

the wall unit to accommodate the

wall unit hingeing.

Screw the side spacers to the hous-

ing with 3.5 x 9.5 mm screws and

press them in at the sides.

Exception: Please refer to the notes

under "Special fitting instructions" at

the end of the "Installation" section for

instructions on fitting the appliance into

a wall unit with 19 mm thick carcase

sides or into a 70 cm or 90 cm wide

wall unit.

Measure the gap "T" to be covered

between the rear of the appliance

and the wall.

Use a knife to trim the spacer strip

supplied to measurement "T".

Stick the spacer strip to the under-

side of the appliance.

Turn the side cover caps upwards

and press into position.