Miele DA 408 Інструкція з експлуатації та монтажу - Сторінка 34

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Вентиляційна витяжка Miele DA 408. Miele DA 408 36 сторінок. Ventilation system
Також для Miele DA 408: Інструкція з експлуатації та монтажу (36 сторінок), Розміри виробу (2 сторінок), Інструкція з монтажу (1 сторінок), Інструкція з експлуатації та монтажу (36 сторінок), Інструкція з експлуатації та монтажу (36 сторінок)

Miele DA 408 Інструкція з експлуатації та монтажу
Air extraction
If the exhaust is ducted into an inactive
flue, the air must be expelled parallel to
the flow direction of the flue,
_iii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_iiiiiiiii_ii_iiiiiiiiiiii_
Never connect an exhaust hood to
an active chimney, dryer vent, vent
flue, or room venting ductwork.
Seek professional advice before
connecting
an exhaust hood vent to
an existing, inactive chimney or vent
flue.
important!
If the ductwork runs through rooms,
ceilings, garages, etc. where
temperature
variations exist, it may
need to be insulated to reduce
condensation,
In some cases, a condensate trap may
also be required to collect and
evaporate any condensation
which may
occur. This optional accessory
is
available for ducts 5" (125 ram) and
7/ " (!50
ram) in diameter.
5
/8
When installing a condensate trap,
ensure that it is positioned vertically
and if possible directly above the
exhaust outlet. The arrow on the casing
shows the venting direction,
34