Miele DA 6000 W Інструкція з експлуатації Посібник з експлуатації - Сторінка 19
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вентиляційна витяжка Miele DA 6000 W. Miele DA 6000 W 40 сторінок. Cooker hood
Також для Miele DA 6000 W: План інсталяції (24 сторінок)
Друкувати сторінку
Reading the grease filter operating
hours counter
To check the percentage of time set
already used
^ Press the On/Off sensor s to switch
the fan on.
Wait until the canopy has opened
and the fan is running.
^ Touch and keep your finger on the
Grease filter sensor l.
One or more of the 1 to 4 sensors will
flash.
The number of flashing sensors
indicates the percentage of the
operating time which has already been
used up.
Sensor 1
Sensors 1 and 2 = 50 %
Sensors 1 to 3
Sensors 1 to 4
^ When you take your finger off the
Grease filter sensor l, the current
fan setting will show.
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
= 25 %
= 75 %
= 100 %
Altering the grease filter operating
hours counter
You can set the operating hours
counter to suit the type of cooking you
do.
The operating hours counter is set at
the factory for 30 hours.
Select a shorter time of 20 hours if you
fry a lot.
If you only cook occasionally, we still
recommend 20 hours because grease
which has built up gradually over a long
period of time will harden on the grease
filters and make cleaning more difficult.
If you use very little fat for cooking,
select a longer time of 40 or 50 hours.
To alter the operating time:
^ Press the On/Off sensor s to switch
the fan off.
Wait until the canopy is closed and
the On/Off sensor s has gone out.
^ Touch the Run-on sensor m and the
Grease filter sensor l at the same
time.
The Grease filter sensor l and one of
the fan power level sensors 1 to 4 will
flash.
The 1 to 4 sensors indicate the time set:
1 = 20 hours
2 = 30 hours
3 = 40 hours
4 = 50 hours
Operation
19