Miele DA 6000 W Інструкція з експлуатації Посібник з експлуатації - Сторінка 27
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Вентиляційна витяжка Miele DA 6000 W. Miele DA 6000 W 40 сторінок. Cooker hood
Також для Miele DA 6000 W: План інсталяції (24 сторінок)
Друкувати сторінку
Changing a lamp
,
Exercise caution when changing
halogen lamps. They get very hot
during use, and remain hot for some
time after being switched off: danger
of burning.
Wait until the lamps have cooled
down before changing them.
^ To change a halogen lamp, lower the
canopy into the maintenance
position; see "Position for
maintenance".
^ Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply (See "Warning
and Safety Instructions").
^ Loosen the screws for the cover
behind the top glass slat.
^ Remove the cover.
^ Pull the halogen lamp out of its
socket.
Cleaning and care
^ Use a cloth or glove to fit the new
halogen lamp into its socket and
carefully push it into position.
Halogen lamps required: 20 W with G 4
connector and side reflector, (can be
purchased from Miele).
It is important that the halogen
lamps have a side reflector.
Fit the lamps so that the light is
directed through the gap between
the first and second glass slats.
^ Refit the lamp cover using the two
screws.
^ Close the canopy again; see "Position
for maintenance".
^ Then reconnect the cooker hood to
the mains electricity supply.
27