Miele DAH 2660 Інструкція з експлуатації та монтажу - Сторінка 20
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Вентиляційна витяжка Miele DAH 2660. Miele DAH 2660 48 сторінок.
Друкувати сторінку
Commissioning
Sign out of WiFi (reset to factory
settings)
To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.
Hold down the 1 control and then
press and hold the lighting control
for approx. 2 seconds at the same
time.
If a WiFi connection exists, 2 and 3 will
light up constantly.
Touch 1.
2 will light up constantly, 3 will flash.
After a few seconds, 2 and 3 will flash.
The connection has now been
disconnected.
Confirm your choice with the On/Off
switch .
The WiFi connection has now been
disconnected. A new connection can
now be set up.
20
Setting up Con@ctivity
Activating Con@ctivity 3.0 via the
home WiFi network
Requirements:
- Home WiFi network
- WiFi-enabled Miele hob
Connect the cooker hood and hob to
your home WiFi network (see "Setting
up Miele@home").
The Con@ctivity function will be
activated automatically.
Activating Con@ctivity 3.0 via a direct
WiFi connection
Rather than connecting to the home
network, you can establish a direct
connection between the hob and the
cooker hood.
Requirements:
- WiFi-enabled Miele hob
Hold down the B control and then
press and hold the 1 control for
approx. 2 seconds at the same time.
2 will light up constantly, 3 will flash.
The cooker hood will be ready for
connection for the next 10 minutes.
Start the WiFi connection on the hob.
For further details, see the hob
operating instructions.
When successfully connected, 2 and 3
will light up constantly.
Confirm your choice with the On/Off
switch .
If it is not possible to connect, 2 and 3
flash or the cooker hood cancels the
process.