HP 124708-001 - ProLiant Cluster - 1850 Посібник з впровадження - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з впровадження для Робочий стіл HP 124708-001 - ProLiant Cluster - 1850. HP 124708-001 - ProLiant Cluster - 1850 11 сторінок. Proliant essentials foundation pack installation guide
Також для HP 124708-001 - ProLiant Cluster - 1850: Посібник з впровадження (35 сторінок), Посібник із запобігання помилкам (12 сторінок), Технічна Біла книга (12 сторінок), Оновлення мікропрограми (9 сторінок), Огляд (20 сторінок), Посібник з впровадження (26 сторінок), Вступний посібник (22 сторінок), Посібник з усунення несправностей (18 сторінок), Посібник з монтажу (2 сторінок)

Друкувати сторінку
HP 124708-001 - ProLiant Cluster - 1850 Посібник з впровадження
For more information and to download the latest PSP, see the HP ProLiant Support Pack website
www.hp.com/servers/psp.
NOTE
The PSP installs automatically at the end of the assisted path
installation. It does not need to be initiated to perform a manual
installation of Windows Server 2008 Foundation.

Obtaining the PSP

The latest PSP and individual components for supported Windows operating systems are available at
the HP website at www.hp.com/servers/psp.
PSP updates are available on the HP website at
ftp://ftp.hp.com/pub/softlib2/software1/supportpack-windows/p844001358/v51718.

Installing the PSP

After you download the PSP self-extracting executable, complete the following installation steps:
Go to the directory where the PSP executable is saved.
1.
NOTE
When installing the PSP on a system running Server Core, keep in mind the
following exceptions to the PSP installation:
You cannot specify the location for extracting the PSP files. The files
•
are extracted to the same location as the PSP self-extracting
executable.
You must run the executables rather than double-clicking the .exe files
•
Double-click the executable and extract the PSP to a desired location.
2.
Go to the directory where the extracted PSP is located.
3.
Double-click setup.exe to start the PSP deployment.
4.
NOTE
Make sure that PSP files are in the same directory as the
setup.exe program.
As the PSP deployment starts, it performs an inventory of the available updates and checks the
5.
local system to see what hardware and software is installed.
After the inventory and discovery processes finish, the Select Installation Hosts screen appears.
6.
You can select either the local host or one (or more) remote hosts for PSP deployment.
After selecting the host(s), the Select bundle filter screen displays information about the PSP bundle
7.
to be installed. Select the bundle and the appropriate filter options. For remote deployments,
additional screens allow users to update information on a per-host basis.
www.hp.com/go/ws2008,
.
or the FTP site at