Miele T 1520i Посібник з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сушарка Miele T 1520i. Miele T 1520i 32 сторінки. Vented dryer
Друкувати сторінку
Problem solving guide
Electrical appliances should only be repaired by qualified personnel. Incor-
rectly repaired machines may put the user at risk. There are, however, minor
problems which can be corrected without contacting the Service Department.
What to do if, . . . ?
. . . the tumble dryer fails to
start when turned on?
. . . the laundry is not suffi-
ciently dry?
. . . the drying times are too
long?
. . . the "anti-crease" indica-
tor lamp in the sequence in-
dicator display starts flash-
ing?
Cause . . .
Check whether the "On"
indicator lights up. If so, failure
to start may be due to an
incorrect program selection
procedure.
If the "On" indicator lamp does
not illuminate, check that:
The load consisted of
dissimilar items (size and
fabrics).
Small loads or individual items
may cause the program to
terminate prematurely.
The load was too large for the
3 lb position.
The lint filter is clogged.
The laundry was not spun in
the washer for a sufficient time.
Remedy . . .
Repeat the program selection
procedure in the correct
sequence, as outlined in the
"Program Selection" chapter.
– The "ON/OFF" button is
depressed.
– The door is properly closed.
– The machine is plugged in
and the fuse or circuit breaker
has not tripped.
Select a longer drying
program.
Small loads can be time-dried.
Press the full load / 3 lb button
when drying larger loads.
Clean the lint filter in the door.
Make sure that the laundry is
thoroughly spun before drying.
– Turn the program selector
to "finish".
– Turn the machine off and
then on again.
– Select a program.
– Press the "Start" button.
If the indicator lamp starts
flashing again, this indicates a
fault in the machine.
Please contact the Miele
Service Dept.
15