HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Посібник користувача - Сторінка 24

Current network security codes are unavailable

If you are prompted for a network key or an SSID when connecting to a WLAN, the network is protected

by security. You must have the current codes to make a connection on a secure network. The SSID and

network key are alphanumeric codes that you enter into your computer to identify your computer to the

network.

●

For a network connected to your personal wireless router, review the router user guide for

instructions on setting up the same codes on both the router and the WLAN device.

●

For a private network, such as a network in an office or at a public Internet chat room, contact the

network administrator to obtain the codes, and then enter the codes when prompted to do so.

Some networks change the SSID or network keys used in their routers or access points on a regular

basis to improve security. You must change the corresponding code in your computer accordingly.

If you are provided with new wireless network keys and SSID for a network, and if you have previously

connected to that network, follow the steps below to connect to the network:

Click Start > Network > Network and Sharing Center > Manage wireless networks.

A list showing the available WLANs is displayed. If you are in a hotspot where several WLANs are

active, several will be displayed.

Right-click the network, and then click Properties.

NOTE:

the router or access point is operating.

Click the Security tab, and then enter the correct wireless encryption data into the Network

security key field.

Click OK to save these settings.

Chapter 5 Troubleshooting wireless connection problems

If the network you want is not listed, check with the network administrator to be sure that