Miele Boost CX1 Parquet PowerLine SNCF0 Інструкція з експлуатації Посібник з експлуатації - Сторінка 28
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Пилосос Miele Boost CX1 Parquet PowerLine SNCF0. Miele Boost CX1 Parquet PowerLine SNCF0 32 сторінки.
Друкувати сторінку
Problem solving guide
With the help of the following guide, minor faults in the performance of the appli-
ance, some of which may result from incorrect operation, can be remedied without
contacting Miele. This will save you time and money because you won't need a
service call.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating in-
structions.
Risk of electric shock from mains voltage.
The mains voltage is applied to the appliance even if it is switched off.
Before dealing with any problems, switch the appliance off at the wall socket
and unplug it.
Problem
The vacuum cleaner
switches off automatic-
ally.
The cleaning perform-
ance is poor.
Cleaning performance
is reduced.
28
Cause and remedy
A temperature limiter switches the vacuum cleaner
off automatically if it gets too hot. This can occur
when the airways are blocked by bulky objects.
Switch the vacuum cleaner off immediately using
the On/Off footswitch . Switch off at the wall
socket and unplug it.
After removing the cause, wait for approximately 20–
30 minutes to allow the vacuum cleaner to cool
down. It can then be switched on again.
The dust container is full.
Empty and clean the dust container (see "Mainten-
ance" – "Emptying and cleaning the dust con-
tainer").
The fine dust filter is soiled.
Clean the fine dust filter and the filter mat (see
"Maintenance" – "Cleaning the fine dust filter").
The filter frame/pre-filter is soiled.
Clean the filter frame/pre-filter (see "Maintenance"
– "Cleaning the filter frame and pre-filter").