HP 8000 - Elite Convertible Minitower PC Посібник з налаштування програмного забезпечення - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з налаштування програмного забезпечення для Робочий стіл HP 8000 - Elite Convertible Minitower PC. HP 8000 - Elite Convertible Minitower PC 9 сторінок. Hp compaq 8000 elite small form factor business pc
Також для HP 8000 - Elite Convertible Minitower PC: Список підтримки (34 сторінок), Ілюстрована карта запчастин та сервісного обслуговування (4 сторінок), Брошура та технічні характеристики (4 сторінок)

8. To apply and save changes, select File > Save Changes and Exit.

 If you have made changes that you do not want applied, select Ignore

Changes and Exit.

 To reset to factory settings or previously saved default settings (some

models), select Apply Defaults and Exit. This option will restore the original

factory system defaults.

CAUTION:

Do NOT turn the computer power OFF while the BIOS is

saving the Computer Setup (F10) changes because the

CMOS could become corrupted. It is safe to turn off the

computer only after exiting the F10 Setup screen.

VTd systems

Do the following to enable processor virtualization in VTd systems:

1. Turn on or restart the computer.

2. As soon as the computer is turned on, press F10 when the monitor light turns

green to enter Computer Setup. Press Enter to bypass the title screen, if

necessary.

NOTE:

If you do not press F10 at the appropriate time, you must

restart the computer and again press F10 when the

monitor light turns green to access the utility.

3. Select your language from the list and press Enter.

4. A choice of five headings appears in the Computer Setup Utilities menu: File,

Storage, Security, Power, and Advanced.

5. Use the arrow (left and right) keys to select the appropriate heading. Use the

arrow (up and down) keys to select the option you want, then press Enter. To

return to the Computer Setup Utilities menu, press Esc.

6. Go to Security > System Security.

7. Set Virtualization Technology (VTx) to Enable

8. Set Virtualization Technology Directed I/O (VTd) to Enable