HP 8000f - Elite Ultra-slim Desktop PC Посібник з налаштування програмного забезпечення - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з налаштування програмного забезпечення для Робочий стіл HP 8000f - Elite Ultra-slim Desktop PC. HP 8000f - Elite Ultra-slim Desktop PC 9 сторінок. Usdt pc
Також для HP 8000f - Elite Ultra-slim Desktop PC: Початок роботи (19 сторінок), Список підтримки (34 сторінок), Ілюстрована карта запчастин та сервісного обслуговування (4 сторінок), Довідковий посібник з обладнання (48 сторінок), Quickspecs (26 сторінок)

Minimum Hardware Requirements

Processor: Processor that supports Virtualization

Memory: 2GB RAM

Processor: Processor that supports Virtualization

Memory: 2GB of RAM or Higher

The system BIOS must support virtualization technology in addition to the processor

having the feature for it to function.

By default, the HP system BIOS disables the virtualization support of processors.

Virtualization must be enabled for Windows XP Mode to function.

There are two kinds of Virtualization Technology:

•

Processor-based VT with VMM support

Chipset-based VT with directed I/O

•

The processor-based VT is common across both Intel and AMD processors. Intel VTx

and AMD-V both deal with virtualization at the processor level and are designed to

assist software virtualization.

The chipset-based VT is currently only available with higher-end Intel processors

and chipsets. Intel VTd (Directed I/O) is an extension of VTx and provides the

capability to control DMA accesses and direct them to specific domains which are

regions in physical memory. This will allow better performance for peripheral

devices that take advantage of the feature.

Intel VTd is offered in Intel vPro systems. VTd is not required for Microsoft Virtual PC

to execute, but it could improve performance.

HP systems (dc7xxx, dc5xxx, Elite 600x Pro, and others) that use an HP system

BIOS can access the virtualization option as follows.

Do the following to enable processor virtualization in VTx and AMD-V systems:

1. Turn on or restart the computer.

2. As soon as the computer is turned on, press F10 when the monitor light turns

green to enter Computer Setup. Press Enter to bypass the title screen, if

necessary.