ALLMOVE X10 Pro Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Скутер ALLMOVE X10 Pro. ALLMOVE X10 Pro 14 сторінок.

Друкувати сторінку

The electronics system has the ability to self-diagnose and report a limited set of errors.

Errors will appear on the screen as error codes.

The chart below explains the meaning of each error code:

ADVANCED MATRIX DISPLAY - ERROR CODE CHART

Error Codes

Error Code

Error

Brake Error

Accelerator

Error

Communication

Error

Over Current

Protection

Over Voltage

Protection

Controller

Error

Solution

Brake assembly failure,

or communication error

with the controller.

Accelerator assembly failure,

or communication error with

the controller.

Communication error between the

instrument panel and the controller.

Damaged wire or loose connector,

or faulty instrument panel or controller.

Controller issue, controller needs to

be replaced

Battery voltage is too high.

Replace the battery

Controller error,controller

needs to be replaced

Maintenance

- To avoid damage to the X10Pro's internal circuitry, do not expose it to liquid, moisture,

or humidity.

- Do not use abrasive cleaning solvents to clean the X10Pro.

- Do not expose the X10Pro to extremely high or low temperatures, as this will shorten

the life of the device, destroy the battery, and/or distort certain plastic parts.

- Do not dispose of the X10Pro in fire as it may explode or combust.

- Do not let the X10Pro come into contact with sharp objects, as this will cause scratches

and damage.

- Do not let the X10Pro fall from high places, as doing so may damage the internal

circuitry.

- Do not attempt to disassemble the X10Pro.

- Use only the charger provided by ALLMOVE.

- Use only the manufacturer's authorized replacement parts.

WARNING

Avoid using water or other liquids for cleaning. If water or other liquids enter the scooter,

it will cause permanent damage to the internal components.

Users who disassemble the X10Pro without permission from ALLMOVE will void the

warranty.

Battery Specifications

Battery Type: Rechargeable lithium-ion battery

Charge Time: About 6 hours

Battery Voltage: 36V

Battery Capacity: 10Ah

Working Temperature: 32°F - 86°F (0°C - 30°C)

Charging Temperature: 32°F - 86°F (0°C - 30°C)

Storage Time: 1 year

Storage Temperature: 32°F - 86°F (0°C - 30°C)

Storage Humidity: 5% - 95%