Miele F 1471 SF Інструкція з експлуатації та монтажу - Сторінка 19
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Холодильник Miele F 1471 SF. Miele F 1471 SF 29 сторінок. Product and cut-out dimensions 72" side by side combination
Також для Miele F 1471 SF: Інструкція з монтажу Посібник з монтажу (24 сторінок), Розміри (2 сторінок)
Друкувати сторінку
Installing the appliance
Note:
– Do not twist or jam the appliance
inside the niche. When unscrewing
the height-adjustable feet, proceed
gradually, alternating between left
and right.
– The adjustment of the rear feet is
aided if the appliance is lifted at the
rear (tipped forward slightly).
– If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
– Do not use a power tool to adjust the
rear feet!
Attaching the appliance to the
installation niche
^ Open the appliance door.
^ Fasten the appliance on the left and
right hand sides with the 3 (supplied)
wood screws.
66
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
Now connect the water supply to the
appliance (see "Plumbing").
Attaching the toe-kick cover
The maximum height of the toe-kick
cover is 4" from the top of the floor.
Do not cover the ventilation slits in
the plinth. Risk of damage to the
appliance.
^ If required, cut the toe-kick cover to
the required length and height.
^ Attach the plinth to the appliance.
^ Put the included cover plates in
place.