Miele F 1811 SF Інструкція з монтажу Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Холодильник Miele F 1811 SF. Miele F 1811 SF 24 сторінки. Miele f1811sf / f1801sf freezer - product and cut-out dimensions
Також для Miele F 1811 SF: Розміри (2 сторінок), Розміри виробу (3 сторінок), Інструкція з експлуатації та монтажу (26 сторінок)
Друкувати сторінку
This merging kit should be used for
side-by-side installation of the following
models:
– K 18x1 SF, K 19x1 SF
– F 14x1 SF, F 18x1 SF, F 19x1 SF
– KF 18x1 SF, KF 19x1 SF
– KWT 16x1 SF
For side-by-side installation of
appliances with a stainless-steel
front, you also need a Top-frame.
Contact Miele to obtain a top-frame
in the required width. The width of
the Top-frame corresponds to the
total width of your side-by-side
combination.
Before you begin
Please read all instructions in this
manual, as well as the manual which
accompanied your machine, before
installation and use.
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured per the installation
instructions.
To reduce the risk of injury or
damage to the product, two people
should be used for installation.
Side-by-side
. . . without partition
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together. A
heating mat must also be installed. This
will help avoid condensation and
prevent damages.
Installing the heating mat will
increase energy consumption.
en
3