Miele K 12820 SD edt/cs Інструкція з експлуатації та монтажу - Сторінка 30
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Холодильник Miele K 12820 SD edt/cs. Miele K 12820 SD edt/cs 48 сторінок. Refrigerator with dynamiccooling
Також для Miele K 12820 SD edt/cs: Інструкція з експлуатації та монтажу (44 сторінок)
Problem solving guide
Repair work to electrical appliances
must only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Please note that a call-out charge
will be applied to unnecessary ser-
vice visits where the problem could
have been rectified as described in
these operating instructions.
What to do if . . .
. . . the appliance does not get cold.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check that the plug is correctly
inserted into the socket and switched
on.
^ Check whether the mains fuse has
tripped or whether the refrigerator,
mains voltage or another appliance is
faulty.
If this is the case, contact a qualified
electrician or Miele.
. . . the temperature in the refrigerator
is too low.
^ Set a warmer temperature.
^ The SuperCool function is switched
on. It switches off automatically after
6 - 12 hours.
30
. . . the compressor is switching on
too frequently and for too long.
^ Check whether the ventilation gaps
have been covered or become dusty.
^ Check whether the compressor and
the metal grille (heat exchanger) at
the back of the appliance has
become too dusty.
^ The appliance door has been
opened too frequently.
^ Check that the door closes properly.
. . . the interior lighting in the
refrigerator is not working.
^ Has the appliance door been left
open for too long? To avoid
overheating, the lighting switches
itself off automatically after approx.
15 minutes if the door is left open.
If this is not the case, then the interior
lighting is defective.
^ Call Miele.
The LED lighting may only be repaired
or changed by a Miele service
technician because there are live parts
under the cover. Danger of injury and
damage!
The cover must not be removed.
Should the cover be damaged or
removed due to damage, exercise
caution. Never look at the lighting
with optical instruments (magnifying
glass or similar).