Miele K 1903 SF Інструкція з монтажу Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Холодильник Miele K 1903 SF. Miele K 1903 SF 30 сторінок.

Installation

Base

A fully loaded appliance is very heavy.

The load-bearing capacity of your floor

must meet the following requirements:

K 18x3 SF . . . . . . . . 1,056lbs (479 kg)

K 19x3 SF . . . . . . . . 1,254 lbs (569 kg)

To ensure that the appliance is installed

securely and functions properly, the

base must be flat, level and made of a

hard, rigid material.

If in doubt, contact Miele.

Furniture/fixtures

The new appliance will be mounted

securely to adjacent and overhead

furniture/fixtures.

For this reason it is essential that all

attachable furniture/fixtures are

connected securely to the base or the

wall by suitable means.

Ventilation

The air intake and outlet must not be

blocked or covered in any way. They

also need to be dusted/cleaned on a

regular basis.

Installation niche

To ensure safe, trouble-free installation

and the best possible cosmetic result,

check to be sure that the installation

space complies with the installation

dimensions. See "Niche dimensions".

The side walls of the installation cavity

must be plumb.

The minimum thickness of the side

walls and the top wall must be

(16 mm).

The minimum thickness of the toe-kick

panel must be ½" (13 mm). A thickness

" (19 mm) is recommended.