Miele KF 882 iD-1 Посібник з експлуатації та встановлення - Сторінка 29

Переглянути онлайн або завантажити pdf Посібник з експлуатації та встановлення для Холодильник Miele KF 882 iD-1. Miele KF 882 iD-1 45 сторінок. With dynamic cooling

Друкувати сторінку

Repairs to electrical appliances

should only be carried out by a

suitably qualified and competent

person in accordance with local and

national safety regulations.

Unauthorised repairs could be

dangerous.

The following faults can be corrected

without contacting the Miele Service

Department.

^ Check to see whether any pieces of

furniture next to the appliance are

vibrating whilst the appliance is in

operation.

Switch the appliance off then:

^ Check whether the appliance is

aligned correctly.

^ Check whether all parts at the rear of

the appliance are free from

hinderance. Remove any hinderance.

^ Check whether the cable clips were

unclipped from the back of the

appliance before installation. They

could vibrate when the appliance is

operating.

^ Are all removable parts securely

located in the appliance?

^ Are bottles or containers touching

each other?

Remember that the noise of the

compressor and the coolant circulating

in the system is unavoidable.

^ Make sure that the temperature dials

are not pointing to the "0" position.

^ Check that the plug is correctly

inserted in the socket.

^ Check that the fuse is not defective

and that the mains fuse has not

blown. If it has contact the Miele Ser-

vice Department.

^ This is not a fault. The suction caused

by opening and closing the door is

preventing the door from opening.

Wait a few minutes and then try

again. It should now open without

force.

^ Turn the temperature dial to a setting

closer to "0".

^ The super freeze function has not

been switched off. The indicator light

is still on.

^ Check whether ventilation gaps in the

plinth and in the housing unit at the

top have been covered over or

become too dusty.