Miele GAS COMBISET CS 1012 Інструкція з експлуатації та монтажу - Сторінка 18

Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня Miele GAS COMBISET CS 1012. Miele GAS COMBISET CS 1012 44 сторінки. Double gas combiset
Також для Miele GAS COMBISET CS 1012: Інструкція з експлуатації та монтажу (44 сторінок), Розміри виробу (4 сторінок), Інструкція з конвертації (40 сторінок)

Frequently asked questions

Repairs should only be carries out by an authorized technician in

accordance with local and national safety regulations. Unauthorized repairs

could cause injury or appliance damage. The manufacturer cannot be held

responsible for unauthorized work.

The burner does not ignite when the combiset is being used for the first

time or after an extended period of not being used.

Possible fault

There could be air in the gas pipe.

The On/Off and residual heat indicators are flashing.

Possible fault

There has been a power failure.

The On/Off indicator is flashing.

Possible fault

The gas supply has been cut-off.

Solution

You may need to make several

attempts before the burner ignites

successfully.

Solution

Turn all the controls clockwise to "ß".

You can now operate the appliance as

normal.

Solution

– Turn all the controls clockwise to

position "ß". You can now operate the

appliance as normal.

– If the problem persists, disconnect

the appliance from the electrical

supply for a few seconds.