Miele HR 1936 Інструкція з експлуатації Посібник з експлуатації - Сторінка 40
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Варильна поверхня Miele HR 1936. Miele HR 1936 44 сторінки. Dual fuel upright cooker
Також для Miele HR 1936: Інструкція з експлуатації Посібник з експлуатації (48 сторінок)
Друкувати сторінку
Problem solving guide
Problem
The flame suddenly
looks different.
The gas flame goes out
during operation.
The electric ignition on
the burner does not
spark.
The cooktop cannot be
operated.
The cooktop switches
off during use.
40
Possible cause and remedy
The burner parts are not positioned correctly.
Position the burner parts correctly.
The burner head or the holes in the burner cap are
dirty.
Remove any soiling.
The burner components are not positioned correctly.
Position the burner components correctly.
There has been a power cut.
Turn the control knob to (Off). When the power
supply is restored the cooktop can be operated
again as usual.
The mains circuit breaker has tripped.
You may need to contact a qualified electrician or
Miele.
There is food residue stuck between the ignition
electrode and the burner cap.
Remove any soiling. (See "Cleaning and care").
The cooktop is locked during pyrolytic cleaning.
This is not a fault.
Turn the control knobs to (Off). As soon as the
Pyrolytic cleaning programme is finished, the
cooking zones can be switched on again.
Pyrolytic cleaning has been started and the cooktop
has been automatically switched off and locked.
This is not a fault.
Turn the control knobs to (Off). As soon as the
Pyrolytic cleaning programme is finished, the
cooking zones can be switched on again.