Miele KM 6395 Інструкція з експлуатації та монтажу - Сторінка 38
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та монтажу для Варильна поверхня Miele KM 6395. Miele KM 6395 48 сторінок. Ceramic cooktops with induction
Друкувати сторінку
Installation
Preparing the worktop
The exact positions of the spring
clamps are shown in the building-in
dimensions for the cooktop.
^ Make the worktop cut-out according
to the dimensions given in the
building-in diagram. Remember to
maintain the minimum safety
distances (see "Safety instructions
for installation").
Worktops made of wood
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
Make sure that the sealant does not
come into contact with the top of the
worktop.
^ Place the spring clamps (supplied)
on the upper edge of the cut-out.
^ Secure the spring clamps a with the
3.5 x 25 mm wood screws supplied.
38
Granite and marble worktops
You will require double-sided tape
and silicone (not supplied).
^ Fix the spring clamps in place using
double-sided tape c.
The spring clamps must rest on the
top edge of the cut-out.
^ Apply silicone to the side edges and
the lower edge of the spring clamps.