Allo RemoteControl SEA Head 433 2 Посібник користувача з програмування
Переглянути онлайн або завантажити pdf Посібник користувача з програмування для Пульт дистанційного керування Allo RemoteControl SEA Head 433 2. Allo RemoteControl SEA Head 433 2 2 сторінки.
Друкувати сторінкуSEA Head 433 2 – Head 433 4 – Head 868 MHz
How to program your new remote control:
There are different methods you can use to program your new remote control
Remote-to-remote programming:
1.
Approach your motor so you are standing a few feet away from it.
2.
Open the casing of your already-programmed remote control.
3.
Press the button T5 for 1 second (fig 1). The LED light D1 on your already-programmed
remote control illuminates and then turns off. Let the button T5 go.
4.
During the following 5 seconds, press the button you wish to program on your new remote
control. Let it go.
5.
Repeat this procedure for each button you wish to program.
6.
Wait 10 seconds.
7.
Your new remote control is programmed.
You r Prog ramming Inst ructions
for you r new remote cont rol
www.AlloRemoteControl.com –