Allo RemoteControl SOMFY Keytis Інструкція - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція для Пульт дистанційного керування Allo RemoteControl SOMFY Keytis. Allo RemoteControl SOMFY Keytis 2 сторінки.
Друкувати сторінку
Briefly press the button chosen to control the Dexxo Pro motor. The remote control sounds a confirmation beep and the
Dexxo Pro motor's light blinks for five seconds.
Programming by copying a previously programmed Keytis remote control:
1. Press the "PROG" button on the previously programmed remote control until the green indicator comes on (two
seconds)
2. Briefly press the "PROG" button on the new remote control
3. Wait for the second beep and for the green indicator to start blinking rapidly (a few seconds)
Individually copy the programming of a Keytis remote control button
1. Press the "PROG" button on the previously programmed remote control until the green indicator comes on (two
seconds)
2. Briefly press the button to copy on the previously programmed remote control
3. Briefly press the "PROG" button on the new remote control.
4. Wait for the confirmation beep (after a few seconds)
5. Briefly press the button chosen to control Dexxo Pro on the new remote control
It is impossible to program Keytis remote controls in the following cases: .
The remote control has not memorised the system key.
A number of installation receivers are in programming mode.
A number of remote controls are in key transfer or programming modes.
Any incorrect programming is indicated by a series of fast beeps together with the orange indicator blinking on
the Keytis remote control.
Programming by copying a previously programmed Keygo io remote control:
This operation is used to copy the programming of a previously programmed remote control button
1. Simultaneously press the outer right and outer left buttons on the previously programmed remote control (A)
until the green indicator light comes on (2 seconds)
2. Press the button for 2 seconds to copy the previously programmed remote control (A)
3. Simultaneously briefly press the outer right and outer left buttons on the new remote control (B)
4. Briefly press the selected button to actuate the Dexxo Pro on the new remote control
Visit our website: www.Alloremotecontrol.com