Dialighting IS50-MH Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для У центрі уваги Dialighting IS50-MH. Dialighting IS50-MH 6 сторінок.

Друкувати сторінку
Regardless of the rigging option you choose for your SPOT LED, always be sure to secure your fixture with
a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as
illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a
safety cable to a carrying handle.
5. 5. 5. 5. DMX-512
DMX-512
DMX-512 control
DMX-512
control
control
control connections
connections
connections
connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the
male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened cable with
XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption
of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω
resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the last
fixture in the chain. Please see illustrations below.
120Ω
120
120
120
2 2 2 2
1 1 1 1
3 3 3 3
PIN 3
PIN 3
PIN 3
PIN 3
PIN 2
PIN 2
PIN 2
PIN 2
6. 6. 6. 6. Menu
Menu
Menu
Menu Operations
Operations
Operations
Operations
DMX Address
A001~Axxx
Auto Run
Master/Alone
Auto Play
Music Control
Master/Alone
Reset
On/Off
Reverse Pan
On/Off
Reverse Tilt
On/Off
Special
Reset Default
On/Off
Mic Sensitivity
0-99%
Reset Default
On/Off
Calibration
Code: 088
PAN, TILT, Color Wheel, Gobo Wheel 1, Gobo Wheel 2,
Special
Focus，Prism
Temperature
XXX℃/℉
Manual Control
PAN=XXX......
Auto
Steps(1..48)
Program1
Scenes 01
Edit Program
..
..
Program8
Scenes XX
Pan=XXX...
...
Time=xx.xS