ALLOWANCE 100 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Контролер ALLOWANCE 100. ALLOWANCE 100 15 сторінок. Television time manager

6 ENTER

ADDITIONAL INFORMATION

5.1. SOUNDS PRODUCED BY THE TV ALLOWANCE

When any legal key is pressed on the TV Allowance the key will cause sound. This sound is a short

click. When a key that is not expected is pressed then no click sound is made. When a key that starts a

function or ends a function is pressed the key makes a short click and then the TV Allowance makes a

second sound; this sound is a short bell-like noise (called a beep). When a key that starts a function that

is not allowed (out of time for some allowance, or illegal access code, for example) the TV Allowance

makes a third sound. This sound is a long buzzing-like noise (called an error tone).

5.2. HOW THE KEYSTROKES ARE DISPLAYED

Each time the TV Allowance is placed in a function that requires a series of digits

to be entered (for example: set or changing an access code, an allowance. or the time of day) the digits

that are entered are displayed from right to left on the display. As the operator continues to enter digits

they are displayed on the right-most digit of the display and the other numbers are shifted one digit to the

left. For example if the operator enters the digits 1478 then the 1 is displayed then 14 is displayed then

147 is displayed and finally 1478 is displayed. If after entering 1478 the operator enters the digits 2452

then 4782 is displayed then 7824 then 8245 then finally 2452 is displayed. To complete the entering of

digits the operator presses the ENTER key.

If a number that you wish to enter starts with zeros then it is not necessary to enter the zeros. For

example if the time was to be set to 9:22 AM then the digits 922 could be entered or the digits 0922

could be entered, both would give the same result.

If you press the enter key before entering the 4 digits the number enter will be padded, on the left, with

zeros. For example if you wanted to assign a code of 0021 as some access code you could enter the digits

21 and press the enter key. This would set the access code to 0021.

5.3. HOW TO CHANGE MASTER PARENTAL ACCESS CODE

The Master Parental Access Code can be changed while in parent mode by

pressing the CODE key followed by the 5 key. The display will flash "PA" and you may enter a new

Master Parental Access Code. While the display is flashing "PA" the ENTER or CLEAR key aborts the

change access code function. While you are entering a new access code the CLEAR key will return the

display to flashing "PA". After entering the four digits the ENTER key is used to set the new access

code and return the allowance to PARENT MODE.

5.4. WHEN TV ALLOWANCE RESETS TIME ALLOWANCES

The TV Allowance will set the time remaining in each child's Weekly Time Allowance to its original value at 12

midnight of day 7. This will be Sunday night at midnight if you use Monday as day 1.

If you want the TV Allowance to set the time remaining in each child's Weekly Time Allowance to its original

value at midnight of some other day of the week you can choose day 1 to stand for the nest day and press a

number accordingly when you set the day of the week in the TIME function.

This would set day 6 as the current day, and completes the setting

of the time of day.