Alloy POEFE8TV3 Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Мережевий маршрутизатор Alloy POEFE8TV3. Alloy POEFE8TV3 13 сторінок. Fast ethernet poe+ unmanaged switch

Друкувати сторінку

6. Network Connection

This switch is designed to be connected to 10 or 100Mbps network cards in PCs and Servers,

as well as to other switches and hubs.

Cabling Guidelines

The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you

can use standard straight-through twisted-pair cables to connect to any other network

device (PCs, servers, switches, routers, or hubs).

Each device requires an unshielded twisted-pair (UTP) cable with RJ-45 connectors at both

ends. Use Category 5 or better for 100BASE-TX connections, and Category 3 or better for

10BASE-T connections.

Connecting To Pcs, Servers, Hubs And Switches

1. Attach one end of a twisted-pair cable segment to the device's RJ-45 connector.

2. Attach the other end of the cable segment to an available port on the switch.

Make sure each twisted pair cable does not exceed 100 meters (328 ft) in length.

3. As each connection is made, the relevant port LED (on the switch) corresponding to

each port will turn on green to indicate that the connection is valid.

POEFE8TV3 User Manual