Alloy LED PrimaLine Neon 100 SB Інструкція з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Освітлювальне обладнання Alloy LED PrimaLine Neon 100 SB. Alloy LED PrimaLine Neon 100 SB 5 сторінок. 24v led tape light
Друкувати сторінку®
®
f) Slide the white metal sleeve over the metal clamp to lock the
connection into place. The notches on the connector and metal
clamp should fit into the grooves of the white metal sleeve.
g) Slide the clear plastic cover over the white metal sleeve and tape
light to seal the connection.
2. Attach the DIY end cap to the opposite end of the
tape light.
Thread the clear cover onto the the end of the tape
light with the lip-end first.
Place the end cap in the same orientation as the
connector, and secure it to the tape light using the
metal clamp and sleeve in the same fashion.
www.AlloyLED.com
page 4 of 5
Installation Instructions
|
Call: 800.910.LEDS [5337]
Specifications subject to change without notice.
|
Text: 510.400.6690
|
v1