Dialogic COMMON-ISDN-API Довідковий посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Довідковий посібник для Мережева карта Dialogic COMMON-ISDN-API. Dialogic COMMON-ISDN-API 10 сторінок. Eicon networks network device reference guide
Друкувати сторінкуThe purpose of the parameter manufacturer command is to specify the kind of operation requested
in a MANUFACTURER_REQ.
The following manufacturer commands are defined:
1:
Assign PLCI
2:
Advanced Codec control
3:
DSP control
4:
Signaling control
5:
RXT control
6:
IDI control
7:
Configuration control
8:
Remove Codec
9:
Options request
This information element appears in:
Manufacturer Specific
The purpose of the parameter manufacturer command parameters is to specify command
dependent parameters.
Parameters for manufacturer command 9: Options Request:
dword
Options mask
This information element appears in:
Manufacturer Command
Manufacturer Command Parameters
Manufacturer specific options that have to be enabled:
[Bit 0..5]: reserved, must be set to 0
[Bit 6]: Enable FAX paper formats and resolutions
[Bit 7..31]: reserved, must be set to 0
Manufacturer Command
7