AllPondSolutions EF2+ Посібник - Сторінка 14
Переглянути онлайн або завантажити pdf Посібник для Акваріуми AllPondSolutions EF2+. AllPondSolutions EF2+ 20 сторінок. Aquarium external filters
Друкувати сторінкуNo Filter Operation / Water Flow
Always ensure the power has been turned on.
Check that your impeller and shaft are seated correctly and n o t damaged
in any way.
Ensure the impeller is free of any type of blockage and can rotate freely inside the
motor head.
Check cable for damage - if damage is evident, unplug the unit and do n o t use the EF.
Do not attempt to fix, consult an electrician or other qualified person. Replace fuse
if necessary.
Check all hosing (part 7) and pipework are connected correctly, air tight a n d unrestricted.
Check the EF filter body (part 5), filter media, hosing (part 7) and all pipework for a build
up of restrictive waste and clean if required.
No Water Is Coming Out Of My Filter
Causes:
The impeller is blocked - please refer to the impeller maintenance section
above.
There is no water in the filter body
The filter is not switched on.
The inlet pipe is clogged.
Solutions:
Use a small jug and scoop some water from the surface of your tank a n d pour into
the filter body.
Check your filter is plugged into the mains and is switched on.
Remove the filter from your tank and clean the inlet pipe.