DiamaPro Systems SVX2+A Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Пилосос DiamaPro Systems SVX2+A. DiamaPro Systems SVX2+A 15 сторінок. Industrial vacuum
Друкувати сторінку
12. USING THE VACUUM CLEANER
Before switching ON the vacuum be sure the
container is empty
1
1
I
0
I - 3 Motors switch ON
O - Switch OFF
2
Adjust Dial for Filter
Purge Interval
13. FILTER REPLACEMENT
1. Disconnect and lift the head.
2. Remove the filter's cylindrical
steel protection
(unscrewing the screws on the
edge)
3. Unscrew the wing nut and
remove the spring and washer
4. Replace the filter with a proper
one for the vacuum cleaner
in use
2 3
1
4
4
2
Push for forced filters cleaning
3
Check Filter Indicator Light
5. Install the new filter according to
the label on the bottom of the filter
• Washer with rubber part facing
the base of the
filter
• Spring
• Plastic wing nut
6. Mount the cylindrical protection,
then reconnect the head on the
filtering chamber
14. MOUNTING OF PARTS
Connect one end of the flexible hose to desired accessory and the other
with the camlock mounted on the filter chamber. (Sew accessories pg.)
15. COLLECTION BAG USE
The dust and the particles are collected in a bag placed in the container
under the hopper.
The Infinity Bag system consists in a plastic tubular from which are ob-
tained 20/30 bags of different weights and dimensions.
Once finished or damaged, the tubular must be replaced by a new refill.
The operations below described must be carried out when machine is
turned off.
1 - Close the bag with two
distanced bands.
2 - Cut the strip between the
two bands.
3 - Pull the Infinity Bag end to
make a new bag.