3B Medical Lumin Bullet Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари 3B Medical Lumin Bullet. 3B Medical Lumin Bullet 12 сторінок. Cleans and sanitizes cpap tubing

Друкувати сторінку

Using your Lumin BULLET

1. Charge Lumin BULLET by plugging in USB cord to bottom of

BULLET.

2. The BULLET will glow RED while charging, and GREEN when

fully charged.

3. Remove BULLET and place inside CPAP tubing so there is

enough tubing hanging over to pull the tubing.

4. Place BULLET in shell, you will feel the magnets grab the

BULLET.

5. Close shell and slide clasp until the shell locks, your BULLET is

now activated.

6. Pull the tubing all the way to the right, then back to the left,

ensuring you cover the entire length of tubing twice, this process

should take 30-60 seconds for optimal disinfection.

7. Remove hose from BULLET, it is now ready to use.