Burkert FULLBORE S051 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари Burkert FULLBORE S051. Burkert FULLBORE S051 16 сторінок.
Друкувати сторінку
INTRODUCTION
•
This manual is integral part of the product. Read carefully the instructions contained since it contains
important indications for the safety of use and of maintenance.
•
The technical information and the relative products of this manual could be modified without any previous
notice.
•
The flowmeter must be used for the use it has been built for. The improper use, possible tampering of the
instrument or parts of it and substitutions of any components not original, makes the warranty to decay
automatically.
•
The manufacturer is considered responsible only if the instrument is used in its original configuration and
setting.
•
The flowmeter makes measures of liquids with conductivity greater than 5µS/cm; it consists of a sensor
(described in this manual) and a converter, for it see the manual provided.
•
If the sensor is supplied in compact version to the converter, consider the operating temperatures more
restrictive, otherwise refer to the respective manuals.
•
When transporting, unpacking and handling the flowmeter, be careful and care.
•
In the case of prolonged storage and of transport, use and store in the original container in a dry place, do
not place more than 3 packs one above the other. It is possible pallets storage and transport (in case of
wooden crates do not place one above the other).
•
For the cleaning of the device use only a damp cloth, and for the maintenance/repairs, contact the customer
service.
•
For the disposal of the device and of the packaging make strict reference to the regulations.
•
It is forbidden the reproduction of the present manual and of possible software supplied with the instrument.
START UP AND MAINTENANCE OF THE INSTRUMENTS
•
Before starting up the instrument, always make a secure connection to ground as suitable to page 6.
•
Verify periodically: the cables integrity, the tightening of the sealing elements (cable glands, covers, etc.),
the mechanical fixing of the instrument on the pipe or on the wall.
2
English
FULLBORE
S055 / S051 / S054