Miller WC-115A Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальна система Miller WC-115A. Miller WC-115A 32 сторінки.
Друкувати сторінку
3-1. Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula
3-2. Information About Default Weld Parameters And Settings
NOTICE − Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical welding
parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are for reference
purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriateness of all parameters
and settings should be evaluated and modified by the end user as necessary based upon application-specific requirements. The end user is solely
responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld parameters and settings, and ultimate
quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warranties including any implied warranty of fitness
for a particular purpose.
3-3. Specifications
AC Input Power
1-Phase
115 Volts,
2 Amperes,
50/60 Or 100 Hz
3-4. Typical Process Connections
.
Use gun Owner's Manual when making connections.
Constant current and/or
constant voltage transformer
and engine-driven DC power
sources. If the power source
does not have a weld output
contactor, the optional
contactor kit should be
ordered.
Weld Power Cable* (Not Included)
10 ft (3 m) Contactor Cord**
10 ft (3 m) 115 VAC Power Cord
SECTION 3 − INSTALLATION
and are incorporated by reference herein.
DC Output For
Welding Power
Control
Source Type
Circuit
Constant Current
(CC) Or Constant
Voltage (CV) DC,
30 Volts
With Or Without
Contactor
Gas Hose
Control Cord
115 Volt
Control
Weld Power Cable
Weld Circuit
Overall Dimensions
Rating
Length: 12-1/4 in.
100 Volts, 200
Amperes, 100%
Width: 9-1/4 in.
Duty Cycle Using
Argon Shielding
Height: 8-5/8 in.
Gas
Voltage Sensing Lead For CC Mode
(Factory Supplied − Customer Installed)
*See Section 3-5 for
recommended cable sizes.
**Contactor cord only supplied with
unit not equipped with contactor.
Weight
(311 mm)
20 lb
(235 mm)
(9 kg)
(219 mm)
Work
OM-1078 Page 9