Miller Welding Короткий посібник з техніки безпеки - Сторінка 4
Переглянути онлайн або завантажити pdf Короткий посібник з техніки безпеки для Зварювальна система Miller Welding. Miller Welding 16 сторінок. For arc welding and cutting the safe way
Також для Miller Welding: Посібник користувача (33 сторінок)
Друкувати сторінку
Safety Quick-Guide
Page 3
Breathing welding fumes can be hazardous to
your health.
Keep your head out of the fumes. Do not breathe the fumes. Use
enough ventilation, exhaust at the arc, or both, to keep fumes and
gases from your breathing zone and the general area.
Read Material Safety Data Sheets (MSDSs) for metals, consum-
ables, and coatings.
Use enough forced ventilation or local exhaust (forced suction) at
the arc to remove the fumes from your breathing area.
Use a ventilating fan to remove fumes from the breathing zone and
welding area.
If adequacy of ventilation or exhaust is uncertain, have your
exposure measured and compared to the Threshold Limit Values
(TLV) in the Material Safety Data Sheet (MSDS).
Welding can cause fire or explosion.
Do not weld near flammable material. Move flammables at least 35
feet (11 meters) away or protect them with flame-proof covers (see
NFPA 51B listed in Section 7).
Welding sparks can cause fires. Have a fire extinguisher nearby,
and have a trained fire watch ready to use it.
Do not weld on drums, tanks, or any closed containers unless a
qualified person has tested it and declared it or prepared it to be
safe (see AWS F4.1 listed in Section 7).