Burkert 2300 Series Додаткові інструкції - Сторінка 4

Переглянути онлайн або завантажити pdf Додаткові інструкції для Позиціонери клапанів Burkert 2300 Series. Burkert 2300 Series 12 сторінок. Remote-positioner, installation on process valves with internal air flow
Також для Burkert 2300 Series: Інструкція з експлуатації Посібник з експлуатації (12 сторінок), Посібник із швидкого старту (19 сторінок)

ASSEMBLING THE POSITION

SENSOR

DANGER!

Risk of injury from high pressure and discharge of medium.

▶ Before working on the device or system, switch off the pres-

sure. Vent or drain lines.

Risk of injury from electric shock.

▶ Before working on the device or system, switch off the power

supply. Secure against reactivation.

WARNING!

Risk of injury due to incorrect assembly.

▶ Assembly may be carried out only by authorized specialist

personnel and using the appropriate tools.

Risk of injury due to unintentional switching on of the plant

and uncontrolled start-up.

▶ Secure system against unintentional activation.

▶ Following assembly, ensure a controlled restart.

CAUTION!

Risk of injury due to heavy device.

A heavy device can fall down and cause injury during transport

or assembly work.

▶ Do not transport, install or remove a heavy device without the

aid of a second person.

▶ Use suitable auxiliary tools.

english

Type 8635, Remote-Positioner

Assembling the position sensor

3.1

Installing attachment kit on the

actuator

NOTE!

To install process valves with welded body, follow the

installation instructions in the operating instructions for the

process valve.

1. Assembling switch spindle

Transparent cap

Pilot air ports

(push-in connectors with

collets or threaded bushings)

Actuator

Fig. 3:

Assembling switch spindle

→ Unscrew the transparent cap on the actuator and the position

indicator (yellow cap) on the spindle extension (if present).

→ For version with push-in connector, remove the collets (white

nozzles) from both pilot air ports (if present).