Miller Infinity Series Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальне приладдя Miller Infinity Series. Miller Infinity Series 32 сторінки. Auto-darkening helmets
Також для Miller Infinity Series: Посібник користувача (32 сторінок)

Miller Infinity Series Посібник користувача
SECTION 4 – SPECIFICATIONS
Please register your product at
Specification
Viewing Field
Reaction Time
Available Shades
All Shades Provide
Continuous UV And
IR Protection.
Sensitivity Control
Adjustable For Vary-
ing Ambient Light
And Welding Arc
Delay Control
Slows Lens Dark-To-
Light State Between
0.1 And 1.0 Seconds
Automatic Power Off
Low Battery Light
Power Supply
Sensors
Operating
Temperature
Storage Temperature
Total Weight
Standards
Warranty
www.MillerWelds.com/Support/Registration
Digital Infinity Helmet
4.4 x 3.1 in (112 x 78 mm)
0.0000400 sec (1/25,000)
Weld Mode: Darkened State: No. 8 - No. 13 Light State: No. 3
Cut Mode: Darkened State: No. 5 - No. 8 Light State: No. 3
Grind Mode: Light State: No. 3
X-Mode: Darkened State: No. 8 - No. 13 Light State: No. 3
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
X-Mode: No. 0–No. 10
Weld Mode: No. 0–No. 10
Cut Mode: No. 0–No. 10
Grind Mode: Not Applicable
X-Mode: No. 0–No. 10
Shuts Lens Off 45 Minutes After Last Arc Is Struck
Red Led Illuminates To Indicate 2-3 Days Remaining Battery Life
Panasonic CR2450 Lithium Batteries (Miller Part No. 217043)
Independent/Redundant (Four)
14°F to 131°F / -10°C to +55°C
When stored in extremely cold temperatures, warm helmet to
ambient temperature before welding.
-4°F to 158°F / -20°C to +70°C
When stored in extremely cold temperatures, warm helmet to
ambient temperature before welding.
21 oz (598 g)
Meets ANSI Z87.1+ And CSA Z94.3 Standards
Four Years From Date Of Purchase (Section 13)
OM-289711 Page 11