Miller PAPR Посібник - Сторінка 30

Переглянути онлайн або завантажити pdf Посібник для Зварювальне приладдя Miller PAPR. Miller PAPR 40 сторінок. Auto-darkening helmets

3-11. Installing Optional Magnifying Lens

NOTICE − Never use solvents or abrasive cleaning detergents. Do not immerse the lens assembly

in water.

The helmet requires little maintenance. However, for best performance clean

after each use. Using a soft cloth dampened with a mild soap and water solution,

wipe the cover lenses clean. Allow to air dry. Occasionally, the filter lens and

sensors should be cleaned by gently wiping with a soft, dry cloth.

OM-235 936 Page 28

AUTO-DARKENING HELMET

Optional Magnifying Lens

Starting at the bottom, slide magni-

fying lens into the helmet retaining

brackets. Align the magnifying lens

with the auto-darkening lens as-

sembly.

D Remove lens holding frame

(with auto-darkening lens)

from helmet shell.

D Remove auto-darkening

lens from lens holder.

D Position lens holder with

magnifying lens holding

tabs facing toward you.

From the bottom up, slide

magnifying lens into posi-

tion. (Slide magnifying lens

up or down slightly as de-

sired.)

D Reinstall the auto-darkening

lens in the lens holder.

D Reverse procedure to re-

move magnifying lens.

To prevent lens fogging, install

flat side of magnifying lens to-

ward auto-darkening lens.

804 818