Miller RFCS-5HD Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальне приладдя Miller RFCS-5HD. Miller RFCS-5HD 16 сторінок. Foot controls
Також для Miller RFCS-5HD: Посібник користувача (16 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінку
1-7. Remote Amperage Control For Welding Power Source With Remote Control Switch
And Output (Contactor) Control
Example Of Combination Front Panel
And Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
Example Of Full Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
OM-844 Page 4
Set Switch
Control Setting
Set Switch
Does Not Matter
Set Control
Off
0
On
Control
Setting
(150 A)
Combination Front Panel
And
Remote Control
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Off
0
On
Unit
Maximum
Press pedal lightly to turn weld
output and gas flow on. Press
pedal further to increase weld
output. Release pedal to turn
off weld output and gas flow.
Ref. 217264-G / Ref. 801736