Miller Weldcraft W-125L Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Зварювальне приладдя Miller Weldcraft W-125L. Miller Weldcraft W-125L 24 сторінки.

Друкувати сторінку

4-1. Required Torch Parts And Torch Assembly

Assembling Torch Parts
1
2
3
11

4-2. International Style Connector Assembly

1
2
Tools Needed:
SECTION 4 − INSTALLATION
4
5
6
7
8
3
(26 mm)
3
10
9
1 in
5
4
1
Cup
2
Chuck
3
Torch Body
4
Handle
5
Water Hose
6
Gas Hose
7
Power Cable
8
Power Cable Adapter
9
International Style Adapter
10 Water Hose For International
Style Adapter
Assembling Torch Body
Keep connections tight. Replace
cup, heat shield, and backcap as
needed.
11 Tungsten Electrode (see Sec-
tion 7)
Installing Tungsten
• Prepare tungsten electrode (see
Section 6-2)
• Cut tungsten to desired length
• Insert electrode into chuck
• Install glass/quartz nozzle
• Turn tungsten clockwise to tighten
(use 53N20 chuck wrench with
180° chucks)
• Adjust nozzle to center electrode
WC0226-B
1
Weld Output Cable
2
Insulating Boot
3
Sleeve
Slide insulating boot onto cable;
strip cable and install sleeve.
4
Connector Body
5
Setscrew
Insert cable with sleeve fully into
connector body, tighten setscrew,
and slide insulating boot over con-
nector.
ST-156 496
OM-266 276 Page 7